|
|
 |
|
|
CE 7260 Spectrophotometer
This symmetrical double beam spectrophotometer from the Aquarius
series, with an 8 cell changer, has a 1.8nm optical bandwidth and
is ideal for dissolution measurements. Its stability of, ±1
x 10-1A/hour, approximately ten times better than single beam instruments,
makes it ideal for extended measurements such as sustained release
monitoring. Full cell and wavelength programming together with wavelength
scanning make the instrument ideal for dissolution applications
and may, when required, be used as a high quality scanning double
beam spectrophotometer for other applications.
|
|
 |
| |
|
|
Operation is simple following menus and prompts
displayed on the LCD screen, using the keypad to interact with the
comprehensive embedded software. Validation software is available.
Used in System 1.
|
|
CE 9260 Spectrophotometer
This is a top performance double beam spectrophotometer from the
Super Aquarius Series. The optical system is fully symmetrical and
uses a high performance end window photomultiplier as detector.
This ensures the very best performance with minimum drift and the
best possible noise performance, particularly for low energy conditions.
Both method and spectral scan storage are provided together with
powerful software for all applications.
For top performance this is the instrument of choice. Validation
software is available. Used in System 3.
|
|
 |
|
CE 3021D Spectrophotometer
This is a high quality single beam spectrophotometer from the Super
Aurius series, with an 8 cell changer and 1.8nm optical bandwidth.
Its stability of 1 X 10-3 A/hour makes it suitable for dissolution
monitoring, and may be used as a general purpose or scanning spectrophotometer
if required.
Full wavelength and cell programming, as well as wavelength scanning,
are possible. Operation is via embedded software using an ILC1)
screen to display menus, prompts etc. with entries made through
its comprehensive keypad. Enhanced accuracy is provided, as with
the CE 7260, by the very low, 0.01%, straylight. Software for validation
is available. Used in System 2.
|
|
 |
|
CE 3791 Peristaltic Pump
The CE 3791 is a multi-cartridge design with good flow accuracy.
Each of the eight channels may be individually released, or adjusted
for roller operating pressure.
The pictures shown here are of the pump with flow tubes and the
pump with one of the cartridges in the released position.
|
| |
|
|
| |
|
|
| |
|
|
|
