Full Performance Validation Spectrophotometers > Double Beam > SuperAquarius
Contact Details Tell a Colleague about this site Download Brochures in PDF Format Employment Opportunities at Cecil Training Distributors Site Map Service A Brief History of Cecil Instruments
 
IonQuest
HPLC
Spectrophotometers
Analysers
Automated Dissolutions
Reflectance
Accessories
SuperAquarius Menu
About SuperAquarius
Integral  Control
Data Transfer to Pc
Fast Program Assay
Reaction Kinetics
Optical Performance
Scanning
Quantitation
System Functions
Sampling
Performance Validation
Software Modules
Specifications
Ordering Accessories and Spares
Ordering Instruments

 

Performance Validation

A full validation software module is available on all instruments and may be released by E-SEF.

A range of Pharmacopoeia (EP/BP/USP) tests are provided for laboratories subject to regulatory control or following good G.L.P. A selection of these tests is shown here.

Test procedures are also provided using filters traceable to national standards with certificates issued by Cecil Instruments.

 
     
     

Absorbance Accuracy

The Pharmacopoeia (EP/BP) test for absorbance accuracy uses a 60mg/L solution of Potassium Dichromate in a 10mm pathlength cuvette. The results of a test are shown here.

     
     

Straylight

The Pharmacopoeia (EP/BP) test for straylight is shown. This uses a 1.2% W/V solution of Potassium Chloride in water measured against water in the reference beam.

The more widely accepted ASTMS tests at 200nm and 340nm are also available.

 
     
     

Optical Bandwidth

An automatic procedure is provided which measures the half height width of the narrow deuterium emission line at 656.1nm.

 
     

Micro-Sipette Sampling

Samples of 300µl or less may be measured with very low cross contamination using the Micro-Sipette system.

All measurements are made in the same cell enhancing accuracy.

The pump operates under the control of the instruments microprocessor system and is mounted within the sample compartment.

Ultra-Micro Sampling

Valuable biological samples prepared with costly reagents may be measured using a special ultra-microcell and holder. Samples of 50µl or less may be accurately measured.

     

Spectrofluorescence

Fluorescence measurements are made using the CE 572 accessory. Excitation radiation may be scanned and sensitivity maximised using the 4nm bandwidth of the CE 9500.

 
     

Automatic Sample Changers

A full range of auto sample changers is available for sample and reference cells with the option of water or thermoelectric temperature control.

 
     

Sample Temperature Control

Thermoelectric control is available for single holders and multi cell holders and includes temperature programming. Operation is via the spectrophotometer's control panel.

 
 
  About | Integral Control | Data Transfer | Fast Program Assay | Reaction Kenetics | Optical Performance
Scanning | Quantitation | System Functions | Sampling | Performance Validation | Software Modules
Specifications | Ordering Instruments | Ordering Accessories