ADEPT SYSTEM 1:
Analytical Isocratic

This simple system is ideal for routine isocratic separations and quality assurance applications. High sensitivity is provided by the Adept CE4201 UV-Visible variable wavelength detector and precise delivery of the mobile phase is provided by the Adept CE4100 solvent delivery pump.

The Adept CE4100 dual piston pump delivers flow rates from 0.001 to 10mL/min with a maximum operating pressure of 40MPa. The pump head is constructed with ceramic inserts to provide bio- compatibility.

The CE4201 UV-Visible detector operates over the wavelength range 190nm-700nm with automatic fast second order filter insertion at 370nm. With noise typically ± 0.35 x 10-5A peak to peak at 230nm and drift, at temperature equilibrium, typically ± 3 x 10-5A/hour, the new Adept UV visible detectors offer the highest performance available.

ADEPT SYSTEM 2:
Analytical Isocratic With Data Processing

This system uses the Adept CE4100 dual piston pump and the Adept CE4200 dual wavelength detector for added flexibility and is provided with PowerStream data processing software and interface unit, CE4901. The interface unit is placed at the base of the stack for convenience and minimum space requirement.

The CE4901 PowerStream software operating in Windows XP may also be used with Windows 98 and 2000, offers the same data processing power as the CE4900 software but unlike the latter, offers no system control. The system is supplied complete with column oven and valve mounting panel, Rheodyne injection valve with 10µL loop, solvent and pipe organiser CE4033, 8µL x 10mm cell and installation kit 4150 01 00.

As an alternative the CE 4900 PowerStream system with full system control, could be used allowing for expansion of the system at a future date.

ADEPT SYSTEM 3:
Automatic Analytical Isocratic

Routine analysis of large numbers of samples may be carried out using this system which requires minimum operator attention. System control and data processing is provided by PowerStream software and interface CE4900. The elegant, powerful and very easy to use software operates in Windows XP and Windows 98 and 2000.

The CE4800 automatic sample injector is supplied which accommodates up to 128 samples and offers a wide flexibility of sampling, analysis, delay and wash volumes.

The system uses the Adept CE4100 dual piston pump with delivery speeds from 0.001 to 10mL/min.

The detector is the Adept CE4200 dual wavelength monitor with a low noise level of less than ± 0.35 x 10-5A peak to peak and incredibly low drift of ± 3 x 10-5A/ hour at temperature equilibrium. The standard 8µL x 10mm flowcell is supplied and a column mounting panel and cover. The system is supplied complete with solvent and pipe organiser CE4033 and installation kit 4500 01 01.

ADEPT SYSTEM 4:
Analytical Binary Gradient

This gradient analytical system is shown here together with 3 column oven which must be ordered extra if required.

Two Adept CE4100 dual piston pumps, with flow rates from 0.001 to 10mL/min and a maximum operating pressure of 40MPa, are used with the dynamic mixer CE4120 supplied.

The Adept dual wavelength UV-Visible detector CE4200 is used with an 8µL x 10mm flowcell. A column mounting panel, fitted to the detector, carries the columns and the Rheodyne injector valve which is complete with a 20µL loop is supplied. A cover for the column is provided.

At the bottom of the stack, shown here, is the interface unit of the CE4900 PowerStream system manager. The software provides full system control and data processing using Windows XP, 98 or 2000.

Results may be printed on any printer supported by the Windows operating system.

ADEPT SYSTEM 5:
Analytical Ternary Gradient

This system uses three Adept CE4100 pumps, each providing flow rates from 0.001-10mL/min. A dynamic mixer CE4130 is provided. The system may be stacked vertically, as shown. A lower profile configuration is shown in the picture on page 2.

The Adept CE4200 dual wavelength, programmable, scanning detector is supplied with an 8µL x 10mm flowcell. The detector is fitted with the column mounting panel which carries the Rheodyne injection valve with a 20µL loop. The solvent bottle and pipe co-ordinator, CE4033, is supplied and the system is complete with the installation kit 4150 03 00.

The PowerStream system manager, CE4900, is supplied for full system control and data processing. The software operates in Windows XP, 98 or 2000. The interface unit is designed to mount at the top or bottom of the stacks as shown.

ADEPT SYSTEM 6:
Automatic Analytical Binary Gradient

Two Adept CE4100 pumps are stacked on top of the CE4900 PowerStream system manager interface. These pumps each deliver at flow rates of 1.001 to 10mL/min and are connected to a dynamic mixer CE4120 placed on top of the dual wavelength detector CE4200 which is stacked above the pumps.

The system stack is topped by the solvent bottle and pipe co-ordinator CE4033 with the dynamic mixer beside it.

The automatic sample injector CE4800 which accommodates 128 samples completes the system, which is supplied with installation kit 4150 02 01. The very high performance of the detector with exceptionally low drift provides a very stable system for extended measurements.

Full system control and data processing are provided by the PowerStream system manager and software. The system is supplied complete with installation kit 4150 02 01.

ADEPT SYSTEM 7:
Binary Gradient – Low Cost

This system is the lowest cost binary gradient system. Consisting of two Adept CE4100 pumps with analytical heads providing flow rates from 0.001-10mL/min. controlled by the Adept CE4201 variable wavelength detector.

Gradients may be set from the control panel of the Adept CE4201 detector which allows up to 10 timed events to be programmed. An 8µL x 10mm pathlength cell is provided and a column mounting panel with Rheodyne Valve and 20µL loop.

The system may be used with a pen recorder for economy, but may be upgraded at a latter date by the addition of a PowerStream system manager with data processing, if required.

ADEPT SYSTEM 8:
Ion Chromatography

Single column ion chromatography or methods requiring a suppressor module are both possible.

The sensitive conductivity detector, CE4710 with twelve ranges from 0.01µS to 5000µS, houses the measuring cell in a thermostatted environment and the suppressor module CE4715 is available but not provided.

Solvent delivery is by the CE4100 dual piston pump. A Rheodyne injection valve is provided fitted with a 100µL loop. A CE4601 heated column oven is supplied, also a CE4033 solvent bottle and pipe guide organiser.

Data processing and system control are provided by the CE4900 interface and software. Installation kit 4150 05 00 is supplied with the system.

For increased sensitivity a solid phase chemical suppressor module CE4715 is available.

ADEPT SYSTEM 9:
Refractive Index : Isocratic

This system is for use with compounds with low absorptivity in the UV-Visible Range. The Adept CE4100 dual piston pump provides flow rates from 0.001 to 10mL/min and a maximum operating pressure of 40MPa.

The detector is the Adept CE4700 differential refractive index detector which is highly stable and sensitive. Temperature control is provided to ensure stability of the system.

The CE4901 PowerStream system manager is provided for all data processing on a PC workstation.

The system is provided complete with solvent and pipe organiser CE4033, column mounting panel and column cover with a Rheodyne injection valve fitted with a 20µL loop and installation kit 4150 01 00.

ADEPT SYSTEM 10:
Automatic Ternary Gradient

This system is shown here with a column oven, which must be ordered extra if required. The CE4800 Automatic sample changer, fitted with its own injector valve, is supplied with this system.

Three Adept CE4100 dual piston pumps, with flow rates from 0.001 to 10mL/min and a maximum operating pressure of 40MPa are supplied, and a dynamic mixer CE4130. The Adept CE4200 dual wavelength UV-Visible detector is provided, together with an 8µL x 10mm flowcell, column mounting panel and column cover.